3 blade prop

[Anthony Romano]

Tried a three blade eleven pitch a couple of times and found it wasn't fast 
enough when the wind picked up. Found the 16.5* 12W to be the best 
comprimise.

Anthony


>From: "Karl G. Mueller" <kgamueller at rogers.com>
>Reply-To: discussion at nsrca.org
>To: <discussion at nsrca.org>
>Subject: Re: Re: 3 blade prop
>Date: Mon, 11 Jul 2005 20:22:26 -0400
>
>Bob,
>
>I just tried the 15.3/4 x 13 three blade APC and it is straining the engine
>a little and the vertical is not as good. Best results I get with the 16.5 
>x
>12
>two blade. Haven't tried to repitch the three blade.
>
>Karl G. Mueller
>kgamueller at rogers.com
>
>
>----- Original Message -----
>From: <rcaerobob at cox.net>
>To: <discussion at nsrca.org>
>Sent: Monday, July 11, 2005 3:55 PM
>Subject: Re: Re: 3 blade prop
>
>
> > Randy - what pipe, length, nitro you using?  What rpm you getting with
>that?
> >
> > My OS's will TURN the 13 pitch, but it is a strain I don't like to put 
>on
>the motor.
> >
> > Bob Pastorello
> > >
> > > From: randy10926 at comcast.net
> > > Date: 2005/07/11 Mon PM 03:11:37 EDT
> > > To: discussion at nsrca.org
> > > Subject: Re: 3 blade prop
> > >
> > > I would think so.
> > >
> > > My os160 have no problems with an APC 15.75X13 three blade.  Since I
>heard the pitch measure less for a Bolly than an APC, I wonder if a Bolly
>18X10 would be enough prop.
> > >
> > > Randy
> > >
> > > -------------- Original message --------------
> > >
> > > Bob
> > >
> > > Do you think that a OS 1.60 will turn the Bolly 18x10 three blade ?
> > >
> > > Robert
> > >
> >
> > Bob Pastorello, El Reno, OK, USA
> > rcaerobob at cox.net
> > www.rcaerobats.net
> >
> > =================================================
> > To access the email archives for this list, go to
> > http://lists.f3a.us/pipermail/nsrca-discussion/
> > To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> > List members email returned for mailbox full will be removed from the
>list.
> >
>
>=================================================
>To access the email archives for this list, go to
>http://lists.f3a.us/pipermail/nsrca-discussion/
>To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>and follow the instructions.
>
>List members email returned for mailbox full will be removed from the list.
>


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.