[SPAM] Re: 9411SA geartrain tick

[Ed Alt]

Eric:
That's sort-of what I was wondering about.  My current eyeglass prescription 
isn't sharp enough to let me see gear flashings on those itty bitty gears in 
that servo, but maybe I can find it with a Gem blade.  I'll give it a shot.

Thanks
Ed
----- Original Message ----- 
From: "Grow Pattern" <pattern4u at comcast.net>
To: <discussion at nsrca.org>
Sent: Wednesday, July 06, 2005 7:38 AM
Subject: Re: 9411SA geartrain tick


> Ed,
>       I had a couple of 9411's that I made into SA's with the plastic gear 
> sets. Output shaft still ali - that's another story :-(
>
> They clicked. I found some mold flashings on the top of  the "plastic" 
> gears that I removed with the scraping action of a razor blade.
>
> Eric.
>
>>> I haven't had that problem. Was that with the servo arm on and tight or 
>>> was it without the servo arm. Does it stop clicking with the arm tight? 
>>> That will tend to pull the output shaft up out of the servo and maybe 
>>> relieve the clicking.
>>>
>>> Jim Ivey
>>>>
>>>> From: "Ed  Alt" <ed_alt at hotmail.com>
>>>> Date: 2005/07/05 Tue PM 10:02:49 EDT
>>>> To: <discussion at nsrca.org>
>>>> Subject: 9411SA geartrain tick
>>>>
>>>>
>>>
>>> =================================================
>>> To access the email archives for this list, go to
>>> http://lists.f3a.us/pipermail/nsrca-discussion/
>>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>>> and follow the instructions.
>>>
>>> List members email returned for mailbox full will be removed from the 
>>> list.
>>>
>>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> List members email returned for mailbox full will be removed from the 
>> list.
>>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
> 
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.