[SPAM] Re: 9411SA geartrain tick

[Ed Alt]

Jim:
This is with or without the servo arm on.

----- Original Message ----- 
From: "Jim Ivey" <jivey61 at bellsouth.net>
To: <discussion at nsrca.org>
Sent: Tuesday, July 05, 2005 10:51 PM
Subject: Re: 9411SA geartrain tick


> Ed
> I haven't had that problem. Was that with the servo arm on and tight or 
> was it without the servo arm. Does it stop clicking with the arm tight? 
> That will tend to pull the output shaft up out of the servo and maybe 
> relieve the clicking.
>
> Jim Ivey
>>
>> From: "Ed  Alt" <ed_alt at hotmail.com>
>> Date: 2005/07/05 Tue PM 10:02:49 EDT
>> To: <discussion at nsrca.org>
>> Subject: 9411SA geartrain tick
>>
>>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
>
> 
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.