Which Bolly undercarriage is suitable for the Majestic ?

[Jerry Budd]

Matt - Pics?

Thx, Jerry

>To all those interested in gear for electric pattern models, let me 
>also put in a shameless plug for our Custom Gear. We have just 
>started to ship our Custom Gear for Electrics. Gear height from 
>axles to base is 10" and depending on your fuse width, have a span 
>of approximately 20" minimum. This is enough height to accomodate up 
>to 24" prop (with adequate clearance), for most model set-ups. The 
>gear is coming in at approximately 6.2 ozs (175 grams), completely 
>ready to fly. Less if I can find lighter wheels.
>
>Contact me off list please, if interested
>
>MattK
>MDK Enigineering
>
>In a message dated 1/30/2005 8:14:59 PM Eastern Standard Time, 
>falconhob at telus.net writes:
>
>Hi Hitesh,
>
>The look of the 2 gear is identical; I believe you're going to split 
>them to fit the fuse, in which case you can go with the F3A large. 
>Next month we will have the F3A curved gear in stock, which 
>dimensionally are similar to the F3A large, but are a curved 
>rearward sweep vs. the more angular look of the F3A.  A slightly 
>taller and much taller version for electrics will be available 
>shortly as well.
>
>Hope this helps,
>
>Wayne Powell
>Bolly Props North America
>www.bollyprops.com
>
>
>
>
>From: discussion-request at nsrca.org 
>[mailto:discussion-request at nsrca.org] On Behalf Of Hitesh Gajjar
>Sent: Wednesday, January 26, 2005 2:40 PM
>To: discussion at nsrca.org
>Subject: Which Bolly undercarriage is suitable for the Majestic ?
>
>     Hi,
>
>I''m about to order the carbon fibre landing gear for my Majestic 
>but I''m not sure about whether to get the F3A Large or the F3A wide 
>? I''m concerned about looks here. Any thoughts ?
>
>Thanks
>Hitesh
>
>


-- 
___________
Jerry Budd
Budd Engineering
(661) 722-5669 Voice/Fax
(661) 435-0358 Cell Phone
mailto:jerry at buddengineering.com
http://www.buddengineering.com
=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.