Need some Focus II help

[Jim Ivey]

 Bill
 Why don't you take all the engine offset out and mix rudder with throttle like Chip does.
hehehe
Jim Ivey
> 
> From: "William C. Harden" <flyinbill1 at bellsouth.net>
> Date: 2005/01/30 Sun PM 06:49:51 EST
> To: <discussion at nsrca.org>
> Subject: RE: Need some Focus II help
> 
> Cute!!
> 
> Bill
> 
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On Behalf Of John Pavlick
> Sent: Sunday, January 30, 2005 5:17 PM
> To: discussion at nsrca.org
> Subject: RE: Need some Focus II help
> 
> Bill,
>  Oh - That's what's happening. I've drilled this hole 3 times and it's
> still
> TOO BIG - makes sense now. Thanks. (Sorry couldn't resist - Come on, I'm
> joking...)
> 
> John Pavlick
> http://www.idseng.com
> 
> 
> > -----Original Message-----
> > From: discussion-request at nsrca.org
> > [mailto:discussion-request at nsrca.org]On Behalf Of William C. Harden
> > Sent: Sunday, January 30, 2005 5:37 PM
> > To: discussion at nsrca.org
> > Subject: RE: Need some Focus II help
> >
> >
> > Thanks Ed.
> >
> > I have cut off approximately 1 inch of material from the box sides and
> I
> > still have 1/8 inch clearance to the spinner backplate.  I may need to
> > cut more material off, but I have been going slow (iterative cutting
> > process) because once the material comes off it can't go back on.
> >
> > Bill
> >
> >
> 
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.