Need some Focus II help

William C. Harden flyinbill1 at bellsouth.net
Sun Jan 30 14:50:04 AKST 2005


Cute!!

Bill

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of John Pavlick
Sent: Sunday, January 30, 2005 5:17 PM
To: discussion at nsrca.org
Subject: RE: Need some Focus II help

Bill,
 Oh - That's what's happening. I've drilled this hole 3 times and it's
still
TOO BIG - makes sense now. Thanks. (Sorry couldn't resist - Come on, I'm
joking...)

John Pavlick
http://www.idseng.com


> -----Original Message-----
> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org]On Behalf Of William C. Harden
> Sent: Sunday, January 30, 2005 5:37 PM
> To: discussion at nsrca.org
> Subject: RE: Need some Focus II help
>
>
> Thanks Ed.
>
> I have cut off approximately 1 inch of material from the box sides and
I
> still have 1/8 inch clearance to the spinner backplate.  I may need to
> cut more material off, but I have been going slow (iterative cutting
> process) because once the material comes off it can't go back on.
>
> Bill
>
>

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.



More information about the NSRCA-discussion mailing list