Need some Focus II help

[John Pavlick]

Bill,
 Oh - That's what's happening. I've drilled this hole 3 times and it's still
TOO BIG - makes sense now. Thanks. (Sorry couldn't resist - Come on, I'm
joking...)

John Pavlick
http://www.idseng.com


> -----Original Message-----
> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org]On Behalf Of William C. Harden
> Sent: Sunday, January 30, 2005 5:37 PM
> To: discussion at nsrca.org
> Subject: RE: Need some Focus II help
>
>
> Thanks Ed.
>
> I have cut off approximately 1 inch of material from the box sides and I
> still have 1/8 inch clearance to the spinner backplate.  I may need to
> cut more material off, but I have been going slow (iterative cutting
> process) because once the material comes off it can't go back on.
>
> Bill
>
>

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.