How much straight is straight enough

[Keith Black]

Try shimming the areas that are sagging. My bet is that you can get it
closer to level.

I would not be happy with that much sag, but then again I'm pretty anal.

Keith

----- Original Message ----- 
From: "Wladimir Kummer de Paula" <wladimir_kummer at ig.com.br>
To: <discussion at nsrca.org>
Sent: Sunday, January 23, 2005 7:31 AM
Subject: How much straight is straight enough


> Yesterday I have built myself a new building surface. I´ve used a 18mmg
> thick MDF that I reinforced with two aluminum extrusions lenghtwise. I
> think is pretty straight, but I still noticed a very small (say
> 0.2-0.5mm) gap due to bowing at the middle.
> Is that acceptable?
> How straight is straight enough?
>
> Thanks
>
> Wladimir
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.