FW: Aluminium spinner for Composite ARF Impact

[Michael Laggis]

Peter,
I'm using the 85mm and it doesn't look bad at all.
 
Michael Laggis
NSRCA 3816

  _____  

From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of brianyemail-nsrca at yahoo.com
Sent: Friday, January 14, 2005 3:41 PM
To: discussion at nsrca.org
Subject: Re: Aluminium spinner for Composite ARF Impact


Ive talked to Tru Turn once...they werent too interested. Custom spinner was
cost prohibitive..$250 or more.
 
ES Composites has a CF spinner that is 92 mm and should be a good fit. Not
sure how starter friendly they are.

humptybump at comcast.net wrote:

The largest FAI spinner that TruTurn lists is 85mm (3 3/8"). That probably
wouldn't look to bad (2.5mm short on each side). They will do some custom
work....May be worth a call to them.   www.truturn.com
<http://www.truturn.com/> 
 
John G.
 

-------------- Original message -------------- 

> 
> Does anyone know if a 90mm high quality aluminium spinner FAI style
spinner 
> is available for the "IMPACT"? 
> 
> I am using DZ power so the spinner will be seeing a lot of the electric 
> starter. 
> 
> 
> Cheers, 
> 
> Peter 
> 
> 
> 
> ================================================= 
> To access the email archives for this list, go to 
> http://lists.f3a.us/pipermail/nsrca-discussion/ 
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm 
> and follow the instructions. 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050115/cc032f17/attachment.html