Futaba 8UA

[tony at radiosouthrc.com]

Wayne:

The main stick pot on the 8U is out of adjustment.  You will need to send it 
in to us or Futaba service for repair.

Tony Stillman
Radio South
3702 N. Pace Blvd.
Pensacola, FL 32505
1-800-962-7802
www.radiosouthrc.com
----- Original Message ----- 
From: "Wayne Galligan" <wgalligan at goodsonacura.com>
To: <discussion at nsrca.org>
Sent: Friday, January 07, 2005 5:53 PM
Subject: Futaba 8UA


>I have a problem with dual elevator control.
>
> I am using the Ailevator mode for dual elevator servo's on my Funtana. 
> The
> problem is when I switch from D/R high to low a small amount of up trim
> kicks in on both servo's.  I cant seem to find any thing in both the 
> factory
> manual or the aftermarket manual on this issue.
> Hopefully all you radio guru's have an answer to my dilemma.
>
> Thanks
>
> Wayne Galligan
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.