Retrofitting

[Bob Pastorello]

RIchard, your standard is too high.  Just lower your expectations, and the frustration level drops exponentially.  Sure worked for me!!!!

Bob Pastorello (owner of not-so-straight, not-so-light, not-so-pretty Pattern planes)
NSRCA 199  AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: Richard Strickland 
  To: NSRCA 
  Sent: Friday, February 25, 2005 9:45 AM
  Subject: Retrofitting


  Why is it when you change something out like a motor mount and you measure, shim, measure, shim, try, shim, measure, try, unshim, try, measure, shim, try, start over, re-shim, try, finally think you're dead nuts on; honk everything down and it's draws itself overnite to where it's a teensy bit off--just enough to thoroughly p**s you off!?

  Richard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050225/20b07731/attachment.html