Question on Bearing change out

[John Pavlick]

Wayne,
 Yeah, that's what I figured. These motors don't turn incredibly fast. A
Nelson 40 they aint. Not sure how fast lawnmower blades turn but they use
sealed bearings and they last a fairly long time without any maintenance.
It's good to hear you're having success with this scheme - one less thing
for me to worry about.

John Pavlick
http://www.idseng.com


> -----Original Message-----
> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org]On Behalf Of Wayne Galligan
> Sent: Monday, February 21, 2005 7:51 PM
> To: discussion at nsrca.org
> Subject: Re: Question on Bearing change out
>
>
> John,
>
> I can not see any difference on power out put.   We have sealed
> bearings in
> just about everything we use.   Wheel bearings and alternators
> for example.
> They have to run under extreme conditions in heat, load and moisture.   I
> know.... a different situation but not so far out there.
>
> Try it with the seal in.  I bet you wont be taking the seals out.
>
> Wayne G.
> ----- Original Message -----
> From: "John Pavlick" <jpavlick at idseng.com>
> To: <discussion at nsrca.org>
> Sent: Monday, February 21, 2005 6:37 PM
> Subject: RE: Question on Bearing change out
>

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.