practice

[Mike Hester]

Oh and you can change the CG and incidence (I know CG for a fact) in the 
drop down menu when you are in flying mode. Just go up and hit the menu, 
drop it down and start modifying. You can change the power, CG, heck all 
kinds of stuff.

-Mike
----- Original Message ----- 
From: "Jim Ivey" <jivey61 at bellsouth.net>
To: <discussion at nsrca.org>
Sent: Saturday, February 19, 2005 11:01 PM
Subject: Re: Re: practice


> Mike
> The fuse is 'zactly the color and color design of mine. My bottom is 
> purple. The wing design is a little different.
> The plane had some roll coupling and some pitch coupling. It acted like 
> the real thing in the air. I used the 8103 mixes to make the plane do 
> right with rudder.  It really surprised me that it reacted this way.  The 
> setup was just like starting to trim a new plane.  The only thing I need 
> to figure out is how to add some tail weight and change wing incidence. 
> The plane pulls to the canopy on the down line and requires some(too much) 
> down elev. when inverted.  I could mix all that out I think with trans 
> mixes. The other thing it does is climb under power. I just trim for power 
> on  for now.
>
> Jim Ivey
>>
>> From: "Mike Hester" <kerlock at comcast.net>
>> Date: 2005/02/19 Sat PM 10:29:17 EST
>> To: <discussion at nsrca.org>
>> Subject: Re: practice
>>
>> Ya know that Smaragd in AFPD looks a lot like yours.
>>
>> I'd like to know, what all did you have to tweak to get it to fly 
>> similar,
>> or was it close as-is?
>>
>> -Mike
>>
>> ----- Original Message ----- 
>> From: "Jim Ivey" <jivey61 at bellsouth.net>
>> To: <discussion at nsrca.org>
>> Sent: Saturday, February 19, 2005 9:52 PM
>> Subject: practice
>>
>>
>> > Well I landed my smaragd to check on e-mail,  now it's back to practice 
>> > on
>> > Aerofly Pro.
>> >
>> > Jim Ivey
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > =================================================
>> > To access the email archives for this list, go to
>> > http://lists.f3a.us/pipermail/nsrca-discussion/
>> > To be removed from this list, go to 
>> > http://www.nsrca.org/discussionA.htm
>> > and follow the instructions.
>> >
>>
>>
>> =================================================
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>>
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.