Polyurethane Glue Solvent

[Ron Van Putte]

On Feb 19, 2005, at 7:37 PM, Bob Pastorello wrote:

> Ron, you may want to have some water and extra Monokote handy.... <VBG>

Like a fire extinguisher and a fresh roll of MonoKote?

Ron Van Putte

>  
> ----- Original Message -----
>  From: Ron Van Putte
> To: discussion at nsrca.org
> Sent: Saturday, February 19, 2005 7:32 PM
> Subject: Re: Polyurethane Glue Solvent
>
>
> On Feb 19, 2005, at 7:22 PM, Bob Pastorello wrote:
>
>
> Yeah, Bob, a soft-flame torch would remove the glue.
>
> By golly! I think he's on to something. I'll try that tonight.
>
> Ron Van Putte
>
>
> ----- Original Message -----
> From: Bob Richards
>  To: discussion at nsrca.org
> Sent: Saturday, February 19, 2005 7:21 PM
> Subject: RE: Polyurethane Glue Solvent
>
> I wonder if a heat gun might soften it enough to peel it off.
>
> spbyrum <spbyrum at hiwaay.net> wrote:
> The instructions say acetone to clean up while it's wet and 80 Grit
> after drying. Bummer on the monocote.
>
> Steve Byrum
>
> -----Original Message-----
> From: discussion-request at nsrca.org 
> [mailto:discussion-request at nsrca.org]
> On Behalf Of Ron Van Putte
> Sent: Saturday, February 19, 2005 1:08 PM
> To: discussion at nsrca.org
> Subject: Polyurethane Glue Solvent
>
> Does anyone know of a good solvent (gets the job done, but doesn't
> dissolve the surface it's on) for dried polyurethane glue? I
> accidentally spilled Gorilla Glue on a MonoKoted wing and didn't
> discover it until the glue had dried. I've tried several solvents
> without success. Help!
>
> Ron Van Putte
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 2624 bytes
Desc: not available
Url : http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050220/7d3e7707/attachment.bin