Belly Pan - Icepoint Style

[Karl G. Mueller]

Eric knows how. He's done it himself and he 's trying to tell me it doesn't come through.

Karl G. Mueller
kgamueller at rogers.com

  ----- Original Message ----- 
  From: Ken Thompson III 
  To: discussion at nsrca.org 
  Sent: Friday, February 18, 2005 10:17 AM
  Subject: Re: Belly Pan - Icepoint Style


  I think he knows somebody, Ron.

  Ken
    ----- Original Message ----- 
    From: Ron Van Putte 
    To: discussion at nsrca.org 
    Sent: Friday, February 18, 2005 9:29 AM
    Subject: Re: Belly Pan - Icepoint Style



    On Feb 17, 2005, at 11:02 PM, Ed Hartley wrote:


      Along with Bob's suggestion you may want to consider this. I use tabs similar to Bob but use 4-40 blind mounting nuts. On the 4-40 screw I use a roofing nail washer which are available at Home Depot, key word "cheap". I would suggest you take a 4-40 screw with you and get the smallest size washer. These washers are convex and have a piece of rubber glued to them. I find this system works great on any fiber glass, wood or the junk plastic which comes with some kits. So far, over a period of several years I have yet to have a crack in any of the mentioned materials where the bolt hole is located.


    Aside from admiring Ed's idea, another thought kept crashing around in my brain, "How did Ed get a photo on the NSRCA Discussion List?" Come on Ed, fess up.

    Ron Van Putte


      ----- Original Message -----
      From: Bob Pastorello 
      To: NSRCA 
      Sent: Thursday, February 17, 2005 8:54 PM
      Subject: Belly Pan - Icepoint Style

      Many of you offerred much-needed ideas on the solution to a 10-screw nightmare.  Here's the best I could do...thanks to those who made this a reality....now we'll see if it will WORK.
          This was the last step before balancing, and it's RTF.  Finally.
       
      http://www.rcuniverse.com/forum/fb.asp?m=2670617


      Bob Pastorello
      NSRCA 199  AMA 46373
      rcaerobob at cox.net
      www.rcaerobats.net
       
       
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050218/9f83a453/attachment.html