Belly Pan - Icepoint Style

[Ken Thompson III]

I think he knows somebody, Ron.

Ken
  ----- Original Message ----- 
  From: Ron Van Putte 
  To: discussion at nsrca.org 
  Sent: Friday, February 18, 2005 9:29 AM
  Subject: Re: Belly Pan - Icepoint Style



  On Feb 17, 2005, at 11:02 PM, Ed Hartley wrote:


    Along with Bob's suggestion you may want to consider this. I use tabs similar to Bob but use 4-40 blind mounting nuts. On the 4-40 screw I use a roofing nail washer which are available at Home Depot, key word "cheap". I would suggest you take a 4-40 screw with you and get the smallest size washer. These washers are convex and have a piece of rubber glued to them. I find this system works great on any fiber glass, wood or the junk plastic which comes with some kits. So far, over a period of several years I have yet to have a crack in any of the mentioned materials where the bolt hole is located.


  Aside from admiring Ed's idea, another thought kept crashing around in my brain, "How did Ed get a photo on the NSRCA Discussion List?" Come on Ed, fess up.

  Ron Van Putte


    ----- Original Message -----
    From: Bob Pastorello 
    To: NSRCA 
    Sent: Thursday, February 17, 2005 8:54 PM
    Subject: Belly Pan - Icepoint Style

    Many of you offerred much-needed ideas on the solution to a 10-screw nightmare.  Here's the best I could do...thanks to those who made this a reality....now we'll see if it will WORK.
        This was the last step before balancing, and it's RTF.  Finally.
     
    http://www.rcuniverse.com/forum/fb.asp?m=2670617


    Bob Pastorello
    NSRCA 199  AMA 46373
    rcaerobob at cox.net
    www.rcaerobats.net
     
     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050218/83119cc1/attachment.html