glassing rudder?

[Nat Penton]

Jerry it works very well to use acetone to thin a finishing epoxy. I  thin 
about 1 to 1.      Nat
                                                                             
                               ---- Original Message -----

From: "Jerry Wilson" <JWilsonJr at houston.rr.com>
To: <discussion at nsrca.org>
Sent: Tuesday, February 08, 2005 7:38 PM
Subject: glassing rudder?


>
>
> I've read in my instructions with Gator cloth that I should mix the epoxy
> with acetone to minimize added weight.  Using Zpoxy Finishing Resin, is 
> this
> a good technique?
>
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
>
>
> -- 
> Internal Virus Database is out-of-date.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.7.0 - Release Date: 1/17/2005
>
> 



-- 
Internal Virus Database is out-of-date.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.0 - Release Date: 1/17/2005

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.