Which Bolly undercarriage is suitable for the Majestic ?

[Maureen Dunphy]

PAC now has all the new Bolly gear in stock.

Maureen
  ----- Original Message ----- 
  From: Jerry Budd 
  To: discussion at nsrca.org 
  Sent: Monday, January 31, 2005 11:31 PM
  Subject: Re: Which Bolly undercarriage is suitable for the Majestic ?


  Matt - Pics?

  Thx, Jerry

  >To all those interested in gear for electric pattern models, let me 
  >also put in a shameless plug for our Custom Gear. We have just 
  >started to ship our Custom Gear for Electrics. Gear height from 
  >axles to base is 10" and depending on your fuse width, have a span 
  >of approximately 20" minimum. This is enough height to accomodate up 
  >to 24" prop (with adequate clearance), for most model set-ups. The 
  >gear is coming in at approximately 6.2 ozs (175 grams), completely 
  >ready to fly. Less if I can find lighter wheels.
  >
  >Contact me off list please, if interested
  >
  >MattK
  >MDK Enigineering
  >
  >In a message dated 1/30/2005 8:14:59 PM Eastern Standard Time, 
  >falconhob at telus.net writes:
  >
  >Hi Hitesh,
  >
  >The look of the 2 gear is identical; I believe you're going to split 
  >them to fit the fuse, in which case you can go with the F3A large. 
  >Next month we will have the F3A curved gear in stock, which 
  >dimensionally are similar to the F3A large, but are a curved 
  >rearward sweep vs. the more angular look of the F3A.  A slightly 
  >taller and much taller version for electrics will be available 
  >shortly as well.
  >
  >Hope this helps,
  >
  >Wayne Powell
  >Bolly Props North America
  >www.bollyprops.com
  >
  >
  >
  >
  >From: discussion-request at nsrca.org 
  >[mailto:discussion-request at nsrca.org] On Behalf Of Hitesh Gajjar
  >Sent: Wednesday, January 26, 2005 2:40 PM
  >To: discussion at nsrca.org
  >Subject: Which Bolly undercarriage is suitable for the Majestic ?
  >
  >     Hi,
  >
  >I''m about to order the carbon fibre landing gear for my Majestic 
  >but I''m not sure about whether to get the F3A Large or the F3A wide 
  >? I''m concerned about looks here. Any thoughts ?
  >
  >Thanks
  >Hitesh
  >
  >


  -- 
  ___________
  Jerry Budd
  Budd Engineering
  (661) 722-5669 Voice/Fax
  (661) 435-0358 Cell Phone
  mailto:jerry at buddengineering.com
  http://www.buddengineering.com
  =================================================
  To access the email archives for this list, go to
  http://lists.f3a.us/pipermail/nsrca-discussion/
  To be removed from this list, go to http://www.nsrca.org/discussionA.htm
  and follow the instructions.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050204/2aa4f381/attachment.html