[NSRCA-discussion] Prop weight question

[Gordon Anderson]

Ed,

Thanks for the info. I wish Mejxlik made a few more props in the 17" diameter.
These are sure beautiful props and the weight savings is a real plus.

--Gordon

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ed Alt
Sent: Monday, December 26, 2005 6:35 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Prop weight question

Gordon:
I will hazard a guess that it may not perform as well as the APC 17x12 for
pulling strength, but will probably have decent brakes at least.  My only
experience with this prop is on a Moki 1.8.  I usually ran a Bolly 19x8
(re-pitched from 19x10) with Scimitar tips on that engine and I always felt that
the Mezjlik underperformed the Bolly, but's it's an apples-oranges comparison in
this case.  I suggest trying it, you might get a good surprise.
Ed

----- Original Message -----
From: "Gordon Anderson" <gordonanderson at verizon.net>
To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
Sent: Monday, December 26, 2005 8:40 PM
Subject: RE: [NSRCA-discussion] Prop weight question


>I don't know how a 18-10 would work. I'm running a OS 1.60 and have used a 
>APC
> 17-12 with very good performance. Mejxlik does not make a 17-12 so I was 
> hoping
> a 18-10 would work, maybe someone on the list has some experience?
>
> --Gordon
>
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Mark Hunt
> Sent: Monday, December 26, 2005 5:00 PM
> To: NSRCA Mailing List
> Subject: Re: [NSRCA-discussion] Prop weight question
>
> don't know the mejxlik weight......but I wonder how an 18x10 pro-zinger 
> would
> work?.....should be very light compared to an apc....
>
>
> ----- Original Message ----- 
> From: "Gordon Anderson" <gordonanderson at verizon.net>
> To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
> Sent: Monday, December 26, 2005 6:06 PM
> Subject: [NSRCA-discussion] Prop weight question
>
>
>> Can anyone tell me the weight of a Mejzlik 18-10 prop? I have an
>> overweight
>> Temptation and the 17-12 APC prop weighs 4  1/4 oz. I looking for every 
>> oz
>> I can
>> find.
>>
>> Thanks!
>>
>> --Gordon
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion