[NSRCA-discussion] El Nino canopy

[Scott Anderson]

Ed Miller

email me off line at scott at rcfoamy.com

s.
  ----- Original Message ----- 
  From: Ed Miller 
  To: NSRCA Mailing List 
  Sent: Monday, December 19, 2005 9:16 PM
  Subject: Re: [NSRCA-discussion] El Nino canopy


  I've been thinking of doing the same with an EMC2 plastic canopy. Anyone have any experience at this ?? My thought was to close off the plastic canopy and sink it in a box of plaster of paris to make a mold and then lay the glass up inside the plaster mold. Is that doable ?? Any help, suggestions or ideas greatly appreciated.
  Ed M.
    ----- Original Message ----- 
    From: Ken Thompson 
    To: NSRCA Mailing List 
    Sent: Monday, December 19, 2005 8:45 PM
    Subject: Re: [NSRCA-discussion] El Nino canopy


    Sounds like a lot of work Scott.  That process is something I've never done before.

    Ken
      ----- Original Message ----- 
      From: Scott Anderson 
      To: NSRCA Mailing List 
      Sent: Monday, December 19, 2005 8:14 PM
      Subject: Re: [NSRCA-discussion] El Nino canopy


      Hmm, sounds like a good time to make a plug and mold and make a glass one 

      scott 
      D3 AVP
        ----- Original Message ----- 
        From: Ken Thompson 
        To: NSRCA-discussion at lists.nsrca.org 
        Sent: Monday, December 19, 2005 7:50 PM
        Subject: [NSRCA-discussion] El Nino canopy


        I just came home with my new El Nino Saturday.  Today I had the canopy off and was nosing around the inside checking out the setup.

        I leaned over the bench and heard a crack, I had just leaned on the canopy and put a 4 inch crack in it, lengthways on the top.  

        The question I have is, is there a good way to repair it, without using thin CA, because of the fogging that CA will cause?

        Or does anybody have a canopy that they would be willing to part with?

        TIA,

        Ken


------------------------------------------------------------------------


        _______________________________________________
        NSRCA-discussion mailing list
        NSRCA-discussion at lists.nsrca.org
        http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20051220/d8dd80ab/attachment.html