[NSRCA-discussion] Need info Hydout header & pipe for Webra 145

[Emory Schroeter]

I would not hesitate to recommend the carbon pipe that Aeroslave sells. It's extremely light and very durable. I have used on since the nats on a Webra 1.60 and I think it gives a little boost over the Greve I was running. The price is very good also at $160. Here is their site info...
http://www.aeroslave.com/


Emory Schroeter.


  ----- Original Message ----- 
  From: paul 
  To: NSRCA Mailing List 
  Sent: Saturday, December 17, 2005 5:34 PM
  Subject: Re: [NSRCA-discussion] Need info Hydout header & pipe for Webra 145


      What other pipes are good - that one is a bit pricey.  Also how do I go about calculating the header rise ?
      I suppose it would require first picking the pipe and then the pipe center would be 1/2 the diameter (yes I know that is called the radius) plus the standoff distance from the fuse.  The vertical distance between the pipe center and the center of the exhaust would yield the rise.
      Is there a generally useable estimate for pipe diameter that can be used w/o first selecting the pipe ?
  Thanks,
  Paul
    ----- Original Message ----- 
    From: Gordon Anderson 
    To: 'NSRCA Mailing List' 
    Sent: Saturday, December 17, 2005 1:18 PM
    Subject: RE: [NSRCA-discussion] Need info Hydout header & pipe for Webra 145


    Paul,

    I have a Hydeout with a Webra 1.45 that I flew all last season. The 1.45 has lots of power and I have been very happy with its performance. I have a grieves pipe and a header I bought from Piedmont Models I think its the same as the one Central Hobbies sells. I bought the header with a large rise, about 2 1/2" and then I cut a section out of the header to set the rise at the value I needed. I connected the header together with silicon tubing. The whole setup has given me very good service. 
    I heard you can't get the grieves pipe any more so you might try the ESD2c160L9 from Central, kind of spendy at $230. 
    I did have a lot of trouble with the Webra when I was first setting things up and what worked for me was installing a bladder, bubbleless, tank that I bought from Central.
    I can send you some pictures of my setup if you like.

    --Gordon



----------------------------------------------------------------------------
    From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of paul
    Sent: Saturday, December 17, 2005 7:58 AM
    To: NSRCA Mailing List
    Subject: [NSRCA-discussion] Need info Hydout header & pipe for Webra 145


        A friend has purchased a used Hydeout and decided to install a Webra 145.  Any suggestions on header and pipe to use ?  How much rise should there be on the header.
    TIA
    Paul
    NSRCA 3606


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20051218/4e9ec098/attachment.html