[NSRCA-discussion] securing servo wires

[dwaynenancy]

Mike, I've only found it at the dentist's office never in a retail 
store.  So I asked for more than one unit and use the retail stuff to 
floss.  Dwayne

Mike Hester wrote:

> That's exactly how I do it, except I can't seem to find unwaxed dental 
> floss around here.
>
> So I have a spool of kevlar thread I bought about 4 years ago, and I'm 
> still using it =) That ain't gonna break.
>
> -Mike
>
> ----- Original Message ----- From: "Lance Van Nostrand" 
> <patterndude at comcast.net>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Sent: Thursday, December 15, 2005 11:23 PM
> Subject: Re: [NSRCA-discussion] securing servo wires
>
>
>> I had this problem on one plane.  A simple fix is to thread one wrap 
>> of unwaxed dental floss through all the servo connectors and wrap and 
>> tie it around the receiver.  the unwaxed is so you can pull the knot 
>> tight and put a drop of CA on it to hold.  I'm not much of a knot 
>> tie-er so this works easily.  if you are a good boy scout and can 
>> tell me how to tie a knot tight that can be tied without a 3rd hand, 
>> let me know.
>> --Lance
>>
>> ----- Original Message ----- From: "David Flynt" <dflynt at verizon.net>
>> To: <nsrca-discussion at lists.nsrca.org>
>> Sent: Wednesday, December 14, 2005 9:51 PM
>> Subject: [NSRCA-discussion] securing servo wires
>>
>>
>>> Can anybody suggest a good way to help prevent servo wires from 
>>> pulling out
>>> of a receiver?  I have never paid attention to this, and never 
>>> really had a
>>> problem except one time one of my elevator servo wires pulled 
>>> loose.  I was
>>> fortunate to have half an elevator remaining and enough control to 
>>> land.
>>> But now I only use a single elevator servo.
>>>
>>> I typically use either JR r770 or r649 receivers.
>>>
>>> Any ideas would be appreciated.
>>>
>>> Thanks,
>>>
>>> David Flynt
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>