Finishing

[Lance Van Nostrand]

Steve,
What is the cost for these paints and the Auto Air reducer?  Looks real interesting.
--Lance

  ----- Original Message ----- 
  From: Steven Maxwell 
  To: discussion at nsrca.org 
  Sent: Sunday, December 11, 2005 7:24 PM
  Subject: RE: Finishing


   Nat over the last couple of years I have been playing with Createx Auto Airs http://www.autoaircolors.com/ they are water base paints that is used for airbrushing although they do need a clear coat to bring to a shine. They are extremely light and easy to use they just look dull as applied. They can be mixed and matched to anything and have 128 colors to choose from, theres a dealer you'll find on there dealer page called Dixie Art Supply in New Orleans http://www.dixieart.com/CreatexAutoAir.html I have only cleared with Lustre Kote which is not recomended by them, but maybe for the electrics you won't need the clear. Good luck.
   Steve Maxwell


    ----- Original Message ----- 
    From: Nat Penton 
    To: discussion at nsrca.org
    Sent: 12/11/2005 10:28:25 PM 
    Subject: Finishing


    I don't know whether to use polyurethane, latex, watercolor or crayola. These electrics present all kinds of problems.
                                                            Nat
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20051212/70b03aea/attachment.html