Realflight G2

[Arch Stafford]

It could be that your newer machine does not have a "3D" video card.  I know
that is a problem on a lot of G3 systems.  My brand new P4 2.4Ghz would not
run G3 until I put a true 3D card in it.

Arch Stafford

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org] On
Behalf Of Alan Hewson
Sent: Sunday, December 11, 2005 11:45 AM
To: discussion at nsrca.org
Subject: Re: Realflight G2

The only difference for me is that I have put it on a newer computer. My old

computer (PII, 350Mhz) also has the SAME operating system. Hardware is my 
ONLY difference. I needed no support for the old computer to run it and the 
I am using the same software.
I don't understand......but that's a normal condition :-/
Alan Hewson


----- Original Message ----- 
From: "George Miller" <glmiller3 at cox.net>
To: <discussion at nsrca.org>
Sent: Sunday, December 11, 2005 11:31 AM
Subject: Re: Realflight G2


>I had the same problem...just bought G3 and it works fine...I hate progrmas

>that don't support past versions...but I guess it didn't keep me from 
>buying the new version :)
> ----- Original Message ----- 
> From: "Alan Hewson" <hewson5 at on.aibn.com>
> To: "NSRCA List" <discussion at nsrca.org>
> Sent: Sunday, December 11, 2005 10:27 AM
> Subject: Realflight G2
>
>
>>I decided to install my G2 on my newest computer and it did not work.
>> It is a 2.8Ghz Celeron , 64 Mb video card, 512 Mb Ram, Windows XP Home 
>> SP2........should work????????
>> It does not show me the image of the field or plane. You can hear the 
>> engine running and the engine sound is very much delayed from the stick 
>> movements ie about a minute to rev up to full throttle.
>> The processor performance is only running a 5% - 7% of capacity.
>>
>> Any suggestions?
>>
>> Thanks
>> Alan Hewson
>> =================================================
>> If you want your reply email to go to the list, you must Cc: the list!
>>
>> To access the email archives for this list, go to
>> http://lists.f3a.us/pipermail/nsrca-discussion/
>> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> List members email returned for mailbox full will be removed from the 
>> list.
>>
>
> =================================================
> If you want your reply email to go to the list, you must Cc: the list!
>
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> List members email returned for mailbox full will be removed from the 
> list.
> 

=================================================
If you want your reply email to go to the list, you must Cc: the list!

To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.

=================================================
If you want your reply email to go to the list, you must Cc: the list!

To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.