160DZ New problem

[Jim Ivey]

Ron
It is too rich and putting out the plug.Run it up to about 83-8400 and break it in there.

Jim Ivey
> 
> From: Ronald Filteau <filteau at sasktel.net>
> Date: 2005/08/07 Sun PM 06:40:13 EDT
> To: NSRCA Pattern List <discussion at nsrca.org>
> Subject: 160DZ New problem
> 
> Hi folks
> 
> Got it started finally.   
> 
> Now when I am breaking in the engine I run up the engine.  It runs for a while rich setting.  Lot of oil come out the pipe.  It runs for a minute.  I idle it up and down then the engine just quites run at High end.  Is this because it is to rich.
> 
> about 8000 rpms.  
> 
> Ron
> 
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.