Gear vs Aux 3

[Jim Ivey]

Xavier, if the switch was active he could use it for a snap roll switch.

Jim Ivey
>  
> From: "Anne et Xavier" <xavier.mouraux at sympatico.ca>
> Date: 2005/04/24 Sun AM 10:27:51 EDT
> To: <discussion at nsrca.org>
> Subject: RE: Gear vs Aux 3
> 
> Is there a way to make sure the gear switch is unactive or at least
> doesn't move the elevator ?
> Xavier
> 
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On Behalf Of Ed Alt
> Sent: April 23, 2005 10:24 PM
> To: discussion at nsrca.org
> Subject: Re: Gear vs Aux 3
> 
> 
> Pat:
> OK, shouldn't be any problem.  You can use any of the multipoint mixes
> 51 - 
> 58 and choose 4 as the master, 5 as the slave channel.
> 
> Ed
> ----- Original Message ----- 
> From: "Pat Hewitt" <phewitt at farmersagent.com>
> To: <discussion at nsrca.org>
> Sent: Saturday, April 23, 2005 9:25 PM
> Subject: Re: Gear vs Aux 3
> 
> 
> Charlie, Mike, Ed, and all.
> 
> I have two servos on my rudder, two on my elevator, two for ailerons,
> and 
> one
> for throttle total of 7. My problem is the new JR770S receiver has 7 
> channels
> but they are marked as aux1, aux2, and gear so my need is to mix rudder
> and the gear port.
> 
> We know that one servo as a pull-pull is a choice but not now so forget 
> that.
> 
> Pat Hewitt
> 
> 
> 
> I guess I was clear I want to mix my rudder and gear ports together
> because the new JR 770S does not have a aus3.
> 
> thanks
> 
> Pat H.
> 
> ------ Original Message ------
> Received: 04:10 PM CDT, 04/23/2005
> From: "Ed  Alt" <ed_alt at hotmail.com>
> To: <discussion at nsrca.org>
> Subject: Re: Gear vs Aux 3
> 
> Pat:
> What were you using Aux 3 for or better yet, what is it that you're
> trying to do now?
> 
> Ed
> ----- Original Message ----- 
> From: "Pat Hewitt" <phewitt at farmersagent.com>
> To: <discussion at nsrca.org>
> Sent: Saturday, April 23, 2005 5:07 PM
> Subject: Gear vs Aux 3
> 
> 
> I need some help from you 10X users. I just replaced my JR 950 receiver
> with a 770 to make weight for my ABBRA and by the way we have made
> weight. My question is as you all know the 10 channel 950 has the aux3
> but the 770 does not it just has aux1, aux2, and gear so how do I use
> the gear in place of aux3.
> 
> Thanks
> 
> Pat Hewitt
> Paola, Ks.
> 
> 
> 
> ================To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the
> list.
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the
> list.
> 
> 
> 
> 
> 
> ================To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the
> list.
> 
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the
> list.
> 
> 
> 
> 
> 
> ================To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the
> list.
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the
> list.
> 
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> List members email returned for mailbox full will be removed from the list.
> 
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.