Gear vs Aux 3

Sun Apr 24 06:28:03 AKDT 2005

Is there a way to make sure the gear switch is unactive or at least
doesn't move the elevator ?
Xavier

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Ed Alt
Sent: April 23, 2005 10:24 PM
To: discussion at nsrca.org
Subject: Re: Gear vs Aux 3

Pat:
OK, shouldn't be any problem.  You can use any of the multipoint mixes
51 - 
58 and choose 4 as the master, 5 as the slave channel.

Ed
----- Original Message ----- 
From: "Pat Hewitt" <phewitt at farmersagent.com>
To: <discussion at nsrca.org>
Sent: Saturday, April 23, 2005 9:25 PM
Subject: Re: Gear vs Aux 3

Charlie, Mike, Ed, and all.

I have two servos on my rudder, two on my elevator, two for ailerons,
and 
one
for throttle total of 7. My problem is the new JR770S receiver has 7 
channels
but they are marked as aux1, aux2, and gear so my need is to mix rudder
and the gear port.

We know that one servo as a pull-pull is a choice but not now so forget 
that.

Pat Hewitt

I guess I was clear I want to mix my rudder and gear ports together
because the new JR 770S does not have a aus3.

thanks

Pat H.

------ Original Message ------
Received: 04:10 PM CDT, 04/23/2005
From: "Ed  Alt" <ed_alt at hotmail.com>
To: <discussion at nsrca.org>
Subject: Re: Gear vs Aux 3

Pat:
What were you using Aux 3 for or better yet, what is it that you're
trying to do now?

Ed
----- Original Message ----- 
From: "Pat Hewitt" <phewitt at farmersagent.com>
To: <discussion at nsrca.org>
Sent: Saturday, April 23, 2005 5:07 PM
Subject: Gear vs Aux 3

I need some help from you 10X users. I just replaced my JR 950 receiver
with a 770 to make weight for my ABBRA and by the way we have made
weight. My question is as you all know the 10 channel 950 has the aux3
but the 770 does not it just has aux1, aux2, and gear so how do I use
the gear in place of aux3.

Thanks

Pat Hewitt
Paola, Ks.

================To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.