Gear vs Aux 3

Sat Apr 23 18:24:23 AKDT 2005

Pat:
OK, shouldn't be any problem.  You can use any of the multipoint mixes 51 - 
58 and choose 4 as the master, 5 as the slave channel.

Ed
----- Original Message ----- 
From: "Pat Hewitt" <phewitt at farmersagent.com>
To: <discussion at nsrca.org>
Sent: Saturday, April 23, 2005 9:25 PM
Subject: Re: Gear vs Aux 3

Charlie, Mike, Ed, and all.

I have two servos on my rudder, two on my elevator, two for ailerons, and 
one
for throttle total of 7. My problem is the new JR770S receiver has 7 
channels
but they are marked as aux1, aux2, and gear so my need is to mix rudder and
the gear port.

We know that one servo as a pull-pull is a choice but not now so forget 
that.

Pat Hewitt

I guess I was clear I want to mix my rudder and gear ports together because
the new JR 770S does not have a aus3.

thanks

Pat H.

------ Original Message ------
Received: 04:10 PM CDT, 04/23/2005
From: "Ed  Alt" <ed_alt at hotmail.com>
To: <discussion at nsrca.org>
Subject: Re: Gear vs Aux 3

Pat:
What were you using Aux 3 for or better yet, what is it that you're trying
to do now?

Ed
----- Original Message ----- 
From: "Pat Hewitt" <phewitt at farmersagent.com>
To: <discussion at nsrca.org>
Sent: Saturday, April 23, 2005 5:07 PM
Subject: Gear vs Aux 3

I need some help from you 10X users. I just replaced my JR 950 receiver with
a
770 to make weight for my ABBRA and by the way we have made weight. My
question is as you all know the 10 channel 950 has the aux3 but the 770 does
not it just has aux1, aux2, and gear so how do I use the gear in place of
aux3.

Thanks

Pat Hewitt
Paola, Ks.

================To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.