Looking for light servo extensions: ABBRA

[vicenterc at comcast.net]

I meant 100% more than light duty extensions.

Vince

-------------- Original message -------------- 

John:

I am sorry that took me so long.  The extra heavy duty extensions are in the plane and I can not weigh those.  I have 12" long JR extensions.  The heavy duty is 5 grs.  The light duty is 4 grms.  That is only 1 gr. difference but is 25% more than the light duty.  I think the extra heavy duty could be around 50% more or 8 grms.  We have a lot of extensions in the ABBRA gas version.  If we assume 8 ft of EHH exteansions we could save 32 grms. or 1.02 oz.  It is not much but it is 1 oz.

Vince



-------------- Original message -------------- 

Vince,
 Just wondering - how much do all of your servo extensions weigh right now?
John Pavlick
http://www.idseng.com
  
-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of vicenterc at comcast.net
Sent: Friday, April 08, 2005 1:30 PM
To: NSRCA
Subject: Looking for light servo extensions: ABBRA


Hello all,

I need suggestions to make servo extensions as light as possible. This is for the new ABBRA with gasoline engine and we have the servos in the back to better balance the plane.  I think we can save some weight if we can get very light servo extensions.  We are using 4 digital servos JR 3241 in the tail.  One for each elevator and two pull-pull configuration for the rudder.  The plane right now is about 6 oz over 11 pounds and we are looking for places to reduce the weight. 

Thanks,

Vince
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20050413/60ab1bcc/attachment.html