Looking for light servo extensions: ABBRA

[Adam Glatt]

Could you equip lighter landing gear?  What do the ones you are using weigh?

Also, with four servos in the tail b/c you are nose heavy, wouldn't it 
make sense to put the RX in the tail as well?  You would need a way to 
get inside the rear of the fuselage, of course, but it might be worth it.


vicenterc at comcast.net wrote:

> Hello all,
>  
> I need suggestions to make servo extensions as light as possible. This 
> is for the new ABBRA with gasoline engine and we have the servos in 
> the back to better balance the plane.  I think we can save some weight 
> if we can get very light servo extensions.  We are using 4 digital 
> servos JR 3241 in the tail.  One for each elevator and two pull-pull 
> configuration for the rudder.  The plane right now is about 6 oz over 
> 11 pounds and we are looking for places to reduce the weight. 
>  
> Thanks,
>  
> Vince

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.

List members email returned for mailbox full will be removed from the list.