Paint?

[Scott Smith]

I use an  HVLP roller...er spray gun (highly recommend the Sata MiniJet 3).

Yes, it can be applied over fiberglass (that what System Three is all about)

And the clear coat is just the clear as provided by System Three..needed for
that wet look.
  -----Original Message-----
  From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On
Behalf Of Amir Neshati
  Sent: Saturday, September 25, 2004 9:01 PM
  To: discussion at nsrca.org
  Subject: Re: Paint?


  Do you apply it like a latex paint with a roller or a 3" brush ;-)

  Amir
    ----- Original Message -----
    From: Scott Smith
    To: discussion at nsrca.org
    Sent: Saturday, September 25, 2004 3:30 PM
    Subject: RE: Paint?


    I like the System Three water based polyurethane paints from Nelson
Hobbies.

    http://www.nelsonhobby.com/paint.html

    This has to be the safest way to get a fuel proof finish for the
non-professional.  It won't be a '10' like you can get from PPG, but you can
get an 8.5 with it.  Light weight, easy to use, non-toxic, water cleanup and
the finish is very acceptable with a clear coat.

    Scott
      -----Original Message-----
      From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of John Contreras
      Sent: Saturday, September 25, 2004 6:10 PM
      To: NSRCA List
      Subject: Paint?



      What kind of paints are available out there now to paint planes?  And
are there any that don't required special equipment?

      John Contreras
      jacontrera at earthlink.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040925/f60155a9/attachment.html