Elan construction

[Jerry Wilson]

Evening Earl,

Thanks for the advice.

regards,
Jerry
----- Original Message ----- 
From: "Earl Haury" <ehaury at houston.rr.com>
To: <discussion at nsrca.org>
Sent: Wednesday, September 08, 2004 8:57 PM
Subject: Re: Elan construction


> Jerry
>
> Definitely install the wing first, then reference the stab to the wing.
>
> Earl
> ----- Original Message ----- 
> From: "Jerry Wilson" <JWilsonJr at houston.rr.com>
> To: <discussion at nsrca.org>
> Sent: Wednesday, September 08, 2004 8:32 PM
> Subject: Elan construction
>
>
> >
> > I'm about ready to fix the  wing and horizontal stabilizer to the fuse.
> > The
> > wing is one piece and so is the stabilizer.
> >
> > Question is which is installed first?
> >
> > Do I install stabilizer first and align to a point on the nose?  Then
> > install the wing and align to the stabilizer
> > Or install the wing and align with the fin.  Then install the hor. stab
> > and
> > align with the wing?
> >
> > Or does it matter?
> >
> > TIA,
> > Jerry
> >
> >
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
>
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.