Elan construction

[Bob Pastorello]

Unless the fin is not "square" to the wing saddle installation....<G>

Bob Pastorello
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: Earl Haury 
  To: discussion at nsrca.org 
  Sent: Wednesday, September 08, 2004 8:57 PM
  Subject: Re: Elan construction


  Jerry

  Definitely install the wing first, then reference the stab to the wing.

  Earl
  ----- Original Message ----- 
  From: "Jerry Wilson" <JWilsonJr at houston.rr.com>
  To: <discussion at nsrca.org>
  Sent: Wednesday, September 08, 2004 8:32 PM
  Subject: Elan construction


  >
  > I'm about ready to fix the  wing and horizontal stabilizer to the fuse. 
  > The
  > wing is one piece and so is the stabilizer.
  >
  > Question is which is installed first?
  >
  > Do I install stabilizer first and align to a point on the nose?  Then
  > install the wing and align to the stabilizer
  > Or install the wing and align with the fin.  Then install the hor. stab 
  > and
  > align with the wing?
  >
  > Or does it matter?
  >
  > TIA,
  > Jerry
  >
  >
  > =====================================
  > # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
  > and follow the instructions.
  >
  > 


  =====================================
  # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
  and follow the instructions.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20040908/ed704cb3/attachment.html