Mintor 1.70 Nose Ring

[Richard Strickland]

Get a puller.

RS
----- Original Message -----
From: "Lem and Christina Stevens" <landcstevens at comcast.net>
To: <discussion at nsrca.org>
Sent: Friday, September 03, 2004 7:47 PM
Subject: Mintor 1.70 Nose Ring


> I have a Mintor 1.70 that has a drive hub that is a larger diameter at the
> front than at the rear.  I would like to install a nose ring, and am
> considering a saddle on one side and half a nose ring on the other.  That
> way I can remove the engine from the plane without too much hassle.
Anybody
> else dealt with this problem and found a satisfactory solution?
>
> ----- Original Message -----
> From: "Bryan Kennedy" <bryan.kennedy at mindspring.com>
> To: <discussion at nsrca.org>
> Sent: Friday, September 03, 2004 1:03 PM
> Subject: 2004 Rocket City Pattern Contest (Huntsville, AL)
>
>
> >
> > Just wanted to remind everyone the Huntsville, AL  Rocket City Pattern
> > contest is coming up next weekend September 11-12.
> >
> > We hope for as large of a turn out as we had last year. This should be a
> > great opportunity to gain valuable district points as the District
> > Championship is the next contest.
> >
> > If you plan on attending, please take a moment to pre-register online at
> the
> > link below. You will also find the event flyer and directions to the
field
> > there.
> >
> > http://www.rocketcityrc.com/events/2004-Pattern/2004-Pattern.html
> >
> > We look forward to seeing everyone
> >
> > Bryan & Don
> >
> >
> > Bryan Kennedy
> > Executive Account Manager
> > ADC
> > 770 986-0922
> > 801 858-8915 Fax
> > 770 335-2228 Cell
> > bkennedy at kroneamericas.com
> >
> >
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
> >
>
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.