Mintor 1.70 Nose Ring

[wgalligan]

Email me off line. I have some photos of a puller I made to get the hub
off.   It usually will pop right off after removing the prop and spinner
and engine will pull right out the back off the nose ring.

Wayne   wgalligan at cnbcom.net


-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Lem and Christina Stevens
Sent: Friday, September 03, 2004 7:48 PM
To: discussion at nsrca.org
Subject: Mintor 1.70 Nose Ring

I have a Mintor 1.70 that has a drive hub that is a larger diameter at
the
front than at the rear.  I would like to install a nose ring, and am
considering a saddle on one side and half a nose ring on the other.
That
way I can remove the engine from the plane without too much hassle.
Anybody
else dealt with this problem and found a satisfactory solution?

----- Original Message ----- 
From: "Bryan Kennedy" <bryan.kennedy at mindspring.com>
To: <discussion at nsrca.org>
Sent: Friday, September 03, 2004 1:03 PM
Subject: 2004 Rocket City Pattern Contest (Huntsville, AL)


>
> Just wanted to remind everyone the Huntsville, AL  Rocket City Pattern
> contest is coming up next weekend September 11-12.
>
> We hope for as large of a turn out as we had last year. This should be
a
> great opportunity to gain valuable district points as the District
> Championship is the next contest.
>
> If you plan on attending, please take a moment to pre-register online
at
the
> link below. You will also find the event flyer and directions to the
field
> there.
>
> http://www.rocketcityrc.com/events/2004-Pattern/2004-Pattern.html
>
> We look forward to seeing everyone
>
> Bryan & Don
>
>
> Bryan Kennedy
> Executive Account Manager
> ADC
> 770 986-0922
> 801 858-8915 Fax
> 770 335-2228 Cell
> bkennedy at kroneamericas.com
>
>
> =====================================
> # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>


=====================================
# To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
and follow the instructions.


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.