Need pump settings for OS 61 RFP

[Richard Strickland]

Seems like they were all about a half turn or so in from flush with the
housing.  I've still got a few and I'll try to remember to look at 'em and
report.  NEVER had to fool with the pump on those engines.

RS
----- Original Message -----
From: <JonLowe at aol.com>
To: <discussion at nsrca.org>
Sent: Friday, September 03, 2004 1:13 PM
Subject: Re: Need pump settings for OS 61 RFP


> Jerry,
> Those were sealed with paint drops at the factory, and OS said not to
touch them.  I believe they adjusted each one to spec there.   Never
released the specs that I'm aware of.
>
> Jon Lowe
>
> In a message dated 9/3/2004 2:03:26 PM Eastern Daylight Time, "bravo52"
<bravo52 at cox-internet.com> writes:
>
> >I've completely rebuilt an old OS 61 and want to know what the factory
pump (PD02) screw settings are. I have not adjusted them since I bought the
motor but since the motor has been freshed up, I'd like to start over at the
factory settings. Any ideas?
> >Thanks
> >Jerry L.
> >
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.