Idle on OS140RX

[Chris Moon]

Amram:
    I think their concern is if the motor flops around too much the low 
end throttle setting will constantly change since the pushrod will be 
moving around too.  With the Hyde mount and nose ring you will not have 
any problem.

Chris

Amram Privat wrote:

> Hello all
> I have a new OS140RX Engine. While reading the Engine manual I have 
> seen a paragraph stating that vibrations which are a result of using a 
> soft mount can effect the motor in idle mode and can even cause a cut. 
> They recommend using the idle stop screw on the carb keeping a little 
> spring pressure in order to prevent this. Nevertheless, this will not 
> allow a remote engine shutdown. Is that a real thing?
> Have anyone experienced this? if yes, any recommendations? I am using 
> Hyde OS140 ARIA with a nose ring.
> Thanks
> Amram Leshed
> http://www.f3a-israel.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041031/92a4e98e/attachment.html