OS160 Engine mount

[Mark Hunt]

Greve pipe will work fine.  You may need to add an extension on your header to get the length just right.  I have about 32" for glow plug to back of pipe (not including stinger).  I know that seems real long, but it works perfect for me... 


----- Original Message ----- 
  From: Randy 
  To: discussion at nsrca.org 
  Sent: Monday, October 25, 2004 8:58 PM
  Subject: Re: OS160 Engine mount


  Ok, put more grinding on the schedule.  Buy more grinding discs next time at the Hobby store.

  So will a Greeve Pipe work, or is a different pipe needed for an OS 160?

  Randy
    ----- Original Message ----- 
    From: THERUPMAN at aol.com 
    To: discussion at nsrca.org 
    Sent: Sunday, October 24, 2004 11:34 PM
    Subject: Re: OS160 Engine mount


    Randy,
    Either use a bandsaw with metal blade and cut off about 1/16th" off each side or cut the backplate in half and move it about 1/8th" apart. I've done both and am still using them.
    Bob Ruppel
    Nashville,TN
    THERUPMAN at aol.com
    6153734703
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041025/9c8295ee/attachment.html