Fuel Tank for Revolution Pro

[Bob Kane]

He's running the 140DZ . . . it does not pressurize
the tank.

--- "Daniel J. Hamlett" <d77hamlett at comcast.net>
wrote:

> what engine are you running.  With a YS I need to
> run  tetra tank>
> ----- Original Message ----- 
> From: "Atwood, Mark" <atwoodm at paragon-inc.com>
> To: <discussion at nsrca.org>
> Sent: Friday, October 15, 2004 6:38 PM
> Subject: RE: Fuel Tank for Revolution Pro
> 
> 
> I removed the tank mount that was in the plane (it
> was just two barely glued 
> in 3/8" balsa sticks) and lowered it so sit on the
> wing tube.  I'm using a 
> 24oz Dubro tank (yes...I'm running a DZ..lol) and it
> fits under the canopy 
> without a problem.
> 
> 
> 
> ________________________________
> 
> From: discussion-request at nsrca.org on behalf of
> Daniel J. Hamlett
> Sent: Fri 10/15/2004 8:58 PM
> To: discussion at nsrca.org
> Subject: Fuel Tank for Revolution Pro
> 
> 
> Has anyone seen the inside of the fuse where the
> tank is suposed to go. 
> There is only about 1 1/2 inches of clearance
> between the bottom of the 
> mount for the tank and the bottom of the canopy. 
> What can we do other than 
> cut a hole in the bottom of the canopy.
> 
> =====================================
> # To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 
> 


=====
Bob Kane
getterflash at yahoo.com


		
_______________________________
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com
=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.