Fuel Tank for Revolution Pro

[Daniel J. Hamlett]

what engine are you running.  With a YS I need to run  tetra tank>
----- Original Message ----- 
From: "Atwood, Mark" <atwoodm at paragon-inc.com>
To: <discussion at nsrca.org>
Sent: Friday, October 15, 2004 6:38 PM
Subject: RE: Fuel Tank for Revolution Pro


I removed the tank mount that was in the plane (it was just two barely glued 
in 3/8" balsa sticks) and lowered it so sit on the wing tube.  I'm using a 
24oz Dubro tank (yes...I'm running a DZ..lol) and it fits under the canopy 
without a problem.



________________________________

From: discussion-request at nsrca.org on behalf of Daniel J. Hamlett
Sent: Fri 10/15/2004 8:58 PM
To: discussion at nsrca.org
Subject: Fuel Tank for Revolution Pro


Has anyone seen the inside of the fuse where the tank is suposed to go. 
There is only about 1 1/2 inches of clearance between the bottom of the 
mount for the tank and the bottom of the canopy.  What can we do other than 
cut a hole in the bottom of the canopy.

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.