Temptation

[Richard Strickland]

Hmmm--I see I'm repeating myself myself.......

Richard S.
----- Original Message -----
From: "Richard Strickland" <richard.s at allied-callaway.com>
To: <discussion at nsrca.org>
Sent: Tuesday, October 12, 2004 9:12 AM
Subject: Re: Temptation


> Orland uses some two part automotive polyester 2 part  "Dynatron
> putty-cote"--fine, very light and strong, fairly inexpensive--but you
gotta
> work fast.  Get from automotive paint stores. There are other brands
> probably just as good--this is what they had the last time he bought it
and
> he says they are all pretty similar for the fine,spot stuff.
>
> Richard S.--(all normal(and abnormal) disclaimers apply)
>
> ----- Original Message -----
> From: "Jeff Hughes" <jeffghughes at comcast.net>
> To: <discussion at nsrca.org>
> Sent: Monday, October 11, 2004 7:09 PM
> Subject: Temptation
>
>
> > OK, building season is officially here in Southern Indiana. I'm about to
> > start my Temptation. I'm going to leave the primary color white and just
> put
> > trim colors over the gelcoat. What does everybody use to fill in the
seam?
> > I've used that red Bondo stuff (one part). But have had some
compatibility
> > problems with it and lusterkote.
> > Also, if you use canopy glue to glue the canopy to the hatch, what do
you
> > use to fill in the gap before painting? same stuff?
> >
> > Thanks,
> > Jeff
> >
> > =====================================
> > # To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
> > and follow the instructions.
> >
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.