OS-160 FX simple set-up

[Jason]

Thanks for everyone's help. And this "friend" bought my old Angels Shadow
and would like a 160 in it, but he's not getting my FI version...<G> the FI
versions are for my personal planes....

Thanks again for all the help,
Jason

-----Original Message-----
From: discussion-request at nsrca.org
[mailto:discussion-request at nsrca.org]On Behalf Of John Pavlick
Sent: Saturday, October 09, 2004 8:41 PM
To: discussion at nsrca.org
Subject: RE: OS-160 FX simple set-up


Jason,
 A "friends" motor? Hmmmm, is this a Freudian thing? I thought you were a
big electric fan... OK, here are some things your "friend" might be
interested in - One trick you don't hear a lot about regarding tapping the
crankcase for pressure: On the F.I. motors the upper left backplate bolt
hole has a smaller hole drilled through the boss that exits into the lower
crankcase. If you disassemble the motor (as you should to change the rear
bearing) you can drill this hole yourself. I believe .0625" / 1/16" works.
Replace the upper left backplate bolt with the pressure fitting from the
F.I. motor and you're ready for the pump. Another good thing to do is mount
the needle valve (and pump) on the firewall NOT the motor. Let the motor
mount isolate the needle and pump from the vibration. Bob Pastorello has a
wealth of knowledge on his site and he seems to be very happy with these big
O.S. motors. Tell your "friend" this is a good motor choice and the best
part is he won't have to wait for an hour to charge batteries.

John Pavlick
http://www.idseng.com


> -----Original Message-----
> From: discussion-request at nsrca.org
> [mailto:discussion-request at nsrca.org]On Behalf Of Jason
> Sent: Saturday, October 09, 2004 2:25 PM
> To: NSRCA
> Subject: OS-160 FX simple set-up
>
>
> Hi all,
>
> I'm getting ready to set-up a friends OS-160 FX in a pattern
> plane, and have
> deleted all the posts about the "perfect" set-up. I know there was a Perry
> pump mentioned and a hopper tank. I'm looking for the easiest, most
> maintenance free set-up.
>
> Thanks,
> Jason
> www.jasonshulman.com
>
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.