Practice tools

[Wade Akle]

Don,
Thanks for a great  and informative response. The Formosa is for close to 
home Patern and not for 'hovering'. I do have the 'flat plate' foamies for 
mad-3D.

I have an AXI2208-34; what do you think of it for the Formosa.

I will also be building a Tango and Facination (thanks to John's 
recommendation). This will give me a full range (39"/16oz  to 55"/3+Lbs) 
from which to select the smallest capable airplane. Total cost for the 3 
kits is $210.

Wade

----- Original Message ----- 
From: "Don McCullough" <donald_mccullough at hotmail.com>
To: <discussion at nsrca.org>
Sent: Thursday, October 07, 2004 10:47 AM
Subject: RE: Practice tools


> Wade,
>
> GWS makes the Formosa and it is imported by Horizon. It is a great plane
> when you add a brushless motor and Li-Po batteries. I have been flying
> the current and next year's Masters pattern with it. Great snaps and
> power. It flies the pattern very similar to the 2M ships with the same
> performance. The only real difference is you have to be a bit quicker on
> the sticks. I find this a good thing because when I fly a 2M patter ship
> it is much more relaxing to fly.
>
> I put up a web page with my Formosa experiences. I have now changed to
> the new Thunder Tiger 1350 next generation packs for even more power.
>
> Liked it so much I am building another one - this time with about 1/4"
> dihedral to counteract some adverse roll with rudder.
>
> Here is the site:
>
> http://pages.sbcglobal.net/donald_mccullough/index.html
>
>
> Don McCullough
> NSRCA 1520
>
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On Behalf Of Wade Akle
> Sent: Thursday, October 07, 2004 5:45 AM
> To: discussion at nsrca.org
> Subject: Re: Practice tools
>
> Rick,
> Who makes the Formosa?
> Wade
>
> ----- Original Message ----- 
> From: "rickwallace45" <rickwallace45 at hotmail.com>
> To: <discussion at nsrca.org>
> Sent: Wednesday, October 06, 2004 8:31 PM
> Subject: RE: Practice tools
>
>
> Anthony -
> I've flown a Shock Flier briefly and it's fun...
> But (after a dozen or so flights) the Formosa w/ a Eflite 370 brushless
> is
> the closest thing to a foam pattern plane I've seen or flown. Certainly
> no
> replacement for a Focus or Hyde Away or ..., but way better than a shock
> flier I think.
>
> Haven't flown Real Flight G2, but G1 is stretched to allow a pilot to
> work
> individual maneuvers - I learned initial slow roll inputs that way - but
> lines (horizontal and vertical) are completely impossible.
>
> Come down this weekend and we can play w/ the foamies!
>
> -Rick
>
>
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On
> Behalf Of John Pavlick
> Sent: Wednesday, October 06, 2004 10:52 PM
> To: discussion at nsrca.org
> Subject: RE: Practice tools
>
> Anthony,
> I haven't had much luck with any of the sims (although I haven't tried
> the
> Ikarus 3D sim), mostly because it's hard to duplicate pattern flying.
> What I
> mean is, the view ports don't really provide any good reference points
> for
> lines, etc. I like to use the Ikarus Shock Flyers for practice. You can
> fly
> them anywhere (even indoors in the Winter) and they're not too
> expensive.
> The $60.00 kit with the can motor is fine if you use small servos and a
> 3S
> 340 LiPo pack. Keep it light!!! Leave the L.G. off - you won't need it
> and
> it's heavy and breaks easily. Cheaper than the Formosa - save your money
> for
> fuel!
>
> John Pavlick
> http://www.idseng.com
>
>
>> -----Original Message-----
>> From: discussion-request at nsrca.org
>> [mailto:discussion-request at nsrca.org]On Behalf Of Anthony Romano
>> Sent: Wednesday, October 06, 2004 7:12 PM
>> To: pattern at rcmailinglists.com; discussion at nsrca.org
>> Subject: Practice tools
>>
>>
>> Trying to get ready for the move for Master and wondering, what would
> be
>> better? A simulator or a pattern foamie? Thinking Ikarus flight sim or
> an
>> Axi equipped Formosa.
>>
>> TIA
>>
>> Anthony
>>
>> _________________________________________________________________
>> On the road to retirement? Check out MSN Life Events for advice on how
> to
>> get there! http://lifeevents.msn.com/category.aspx?cid=Retirement
>>
>> =====================================
>> # To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
>> and follow the instructions.
>>
>> ---
>> Incoming mail is certified Virus Free.
>> Checked by AVG anti-virus system (http://www.grisoft.com).
>> Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03
>>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.516 / Virus Database: 313 - Release Date: 9/1/03
>
> =====================================
> # To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> ============# To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
>
> =====================================
> # To be removed from this list, go to
> http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> =====================================
> # To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
> 


=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.