DS8311

[Daniel J. Hamlett]

Ken,

How many flight so you have on the Focus?  Any slop in the linkage?

Dan
----- Original Message ----- 
From: "Kaut, Ken" <kaut at ssd.fsi.com>
To: <discussion at nsrca.org>
Sent: Thursday, October 07, 2004 7:08 AM
Subject: RE: DS8311


I'm using the same setup on my Focus II....working great!
-Ken

-----Original Message-----
From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
On Behalf Of Joe Lachowski
Sent: Wednesday, October 06, 2004 9:01 PM
To: discussion at nsrca.org
Subject: RE: DS8311

Yup, they'll do the job just fine. i use them on rudder and elevator and
use 9411SAs on aileron.

>From: "Daniel J. Hamlett" <d77hamlett at comcast.net>
>Reply-To: discussion at nsrca.org
>To: "NSRCA disscusion" <discussion at nsrca.org>
>Subject: DS8311
>Date: Tue, 1 Jan 2002 05:50:51 -0800
>
>I am going to be building a CAMODEL Fantasy.  My question is if the JR
>DS8311 servos will be strong enough for ail, elv, rud.  I have 2
>DS8411.  I had thought about using one of them on the rudder in place
of the DS8311.
>Any feed back on this subject would be greatly appreiciated.
>
>Dan

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's
FREE!
hthttp://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

=====================================
# To be removed from this list, go to
http://www.nsrca.org/discussionA.htm
and follow the instructions.

============# To be removed from this list, go to 
http://www.nsrca.org/discussionA.htm
and follow the instructions.

=====================================
# To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.