Resolution

[Jeff Hughes]

MessageI figured I was losing resolution. I hate to change out the epoxied in rods in the aileron
  ----- Original Message ----- 
  From: Wayne Galligan 
  To: discussion at nsrca.org 
  Sent: Tuesday, October 05, 2004 6:09 PM
  Subject: Re: Resolution


  Jeff,

  Try to get as close to a 100% ATV that you can by making your control horn longer if you can.  If your maxed out there and cant change anything then limiting you control with dual rates or lower ATV.   Remember when you use dual rate or lower ATV;s you are also losing some of you resolution or total steps in the throw of the servo arm.  Always try the mechanical adjustment first. Then use the radio functions.

  Wayne G.

    ----- Original Message ----- 
    From: Jeff Hughes 
    To: discussion at nsrca.org 
    Sent: Tuesday, October 05, 2004 5:46 PM
    Subject: Resolution


    My ailerons are way too sensitive on my Jupiter, Is it better to limit travel with dual rates?, or atv?, or is the resolution the same. (and yes, i'm on the inside of the servo arm and as far out as I can go on the aileron threaded rod). 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041005/0987564c/attachment.html