Excelleron Progress

[Bob Pastorello]

Hi, Incheol.  Used standard size JR arms, cut off the short parts.  There's a pic on my Excelleron page.
Here's the CF info...  http://www.rcaerobats.net/Arresti/AeroslavePipeSetup.htm
Horizontal stab fit well, some small gaps but nothing more than epoxy-type fill.

Bob Pastorello
NSRCA 199  AMA 46373
rcaerobob at cox.net
www.rcaerobats.net


  ----- Original Message ----- 
  From: Ihncheol Park 
  To: discussion at nsrca.org 
  Sent: Sunday, November 21, 2004 11:36 PM
  Subject: RE: Excelleron Progress


  Bob,

  Did you use a couple of pull-pull wheels or standard full-arm servo horns for the tail?
  I would love to see some pictures of radio installations.

  I am still waiting for a couple of parts before starting the assembly of Explorer (Excelleron maybe started together but can not fly until I get more servos to use in the Excelleron.)

  Hope to see the flight report soon.

  By the way, any problem with the mounting of the horizontal stab?

  There was one guy (when the JR Propo Explorer was out at first) that had horizontal stab failure.  Of course, the Excelleron should have been built better since the manufacturer changed to laser cut.

  Also, would you send me a couple of pictures of your Aeroslave carbon pipe?
  I want to compare something with my pipes.

  Thanks,

  Ihncheol Park
  PatternFlyer"at"sbcglobal.net
    -----Original Message-----
    From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]On Behalf Of Bob Pastorello
    Sent: Sunday, November 21, 2004 10:35 AM
    To: NSRCA
    Subject: Excelleron Progress


    So far, not near flying yet, but making progress.
    http://www.rcaerobats.net/Excelleron/ExcelleronMain.htm

    Bob Pastorello
    NSRCA 199  AMA 46373
    rcaerobob at cox.net
    www.rcaerobats.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041122/57854d40/attachment-0001.html