Measuring Surface Flatness (was "Cabinet Grade Particle Board")

[Del Rykert]

Measuring Surface Flatness (was "Cabinet Grade Particle Board")My opinion is get Bob Nolls series on building and he shows how to do it very accurately with a string. Well at least I was amazed at such a simple way to check.
 
    del
  ----- Original Message ----- 
  From: Mark Grabowski 
  To: 'discussion at nsrca.org' 
  Sent: Friday, November 19, 2004 11:21 AM
  Subject: Measuring Surface Flatness (was "Cabinet Grade Particle Board")


  We've seen some great ideas from several folks. However, a common element to this discussion is that you need to measure how flat the surface winds up. What tricks are you guys using to actually measure how flat the surface is of the bench you just built?







------------------------------------------------------------------------------


  Confidentiality Note: The contents of this e-mail message and its attachments, if any, are intended solely for the addressee(s) hereof. If you are not the named addressee, or if you believe this message has been addressed to you in error, you are requested not to read, disclose, reproduce, distribute, disseminate or otherwise use this information. Delivery of this message to any person other than the intended recipient(s) is not intended in any way to waive confidentiality. If you have received this transmission in error, please alert the sender by reply e-mail. It is also requested that you immediately delete this message and its attachments, if any. Thank You. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041119/adaf7a81/attachment.html