MK control horns

[Bruno Cavalcanti]

Troy,
    I think I didn´t explain very well. The loose part is not the triangle plastic piece that holds the flying surface, but the small plastic piece (with threads) that connects with the link that goes to the servo. Do you know where I can buy them?
Bruno
  ----- Original Message ----- 
  From: Troy A. Newman 
  To: discussion at nsrca.org 
  Sent: Friday, November 19, 2004 12:09 PM
  Subject: Re: MK control horns


  Try a 2mm hex nut on the back side of the bolt. Sometimes I have seen them appear loose but in reality the plastic is stripped out. I always use hex nuts now as a standard thing when assembly the first time. I have never worn one of these things out. This is with the amount of flying that I do. I had one model over 3000 flights same connectors as day #1.

  TN
    ----- Original Message ----- 
    From: Bruno Cavalcanti 
    To: discussion at nsrca.org 
    Sent: Friday, November 19, 2004 4:54 AM
    Subject: MK control horns



      Hi,
          I´ve been using the MK control horns rudder style in some of my control surfaces, but now the plastic piece that connects with the control link is getting loose. The hole in the plastic is increasing and the control surface now has some free movements.
          I´d like to know where I can buy some replacements connectors. I tried the central hobbies page but didn´t find the pieces alone.
      Thanks, Bruno
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20041119/8f1bec9c/attachment.html