3-bladed props for OS160FX

[Ed Hartley]

Ben Oliver ran a 15-1/2 x 12 four blade with great success. BTW, that is 
what I run on my OS140. No need to twist with that one.

Ed

----- Original Message ----- 
From: "William C. Harden" <flyinbill1 at bellsouth.net>
To: <discussion at nsrca.org>
Sent: Monday, November 15, 2004 8:18 PM
Subject: RE: 3-bladed props for OS160FX


> Dave,
>
> What is the possibility that we can get APC to make the 3-blade prop
> that we want??  It seems it would be in their best interest to do so.
>
> Bill Harden
>
> -----Original Message-----
> From: discussion-request at nsrca.org [mailto:discussion-request at nsrca.org]
> On Behalf Of David Lockhart
> Sent: Monday, November 15, 2004 6:55 PM
> To: discussion at nsrca.org
> Subject: Re: 3-bladed props for OS160FX
>
> Claudio,
>
> Below I've posted some info I've written before - I think most of it has
> been on this discussion list before.  In short, progressive twisting is
> not
> needed - a single twist near the root is sufficient.
>
> ions.
>
> =================================================
> To access the email archives for this list, go to
> http://lists.f3a.us/pipermail/nsrca-discussion/
> To be removed from this list, go to http://www.nsrca.org/discussionA.htm
> and follow the instructions.
>
> 

=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.