honeycombing foam cores

[Del Rykert]

Mike..   I have also used a Weller soldering gun.,..  Messes up the tip for 
soldering but I just change to different tip. My gun has 2 stage and low 
setting works fine.

        del

----- Original Message ----- 
From: "Mike Hester" <kerlock at comcast.net>
To: <discussion at nsrca.org>
Sent: Thursday, November 11, 2004 8:07 PM
Subject: Re: honeycombing foam cores


> Thanks guys, all of you. I think I'll try out that hot knife thingy from 
> CST first, that sure sounds like a lot less trouble.
>
> And I usually build all balsa wings/tail, I am just about to mess with 
> some foam and I like options =) I'm not afraid to fill the garbage can 
> with messed up parts. Err actually the floor, it gets to the can 
> eventually....maybe like twice a year......
>
> Thanks guys,
> -Mike
>
> ----- Original Message ----- 
> From: "Koenig, Tom" <Tom.Koenig at actewagl.com.au>
> To: <discussion at nsrca.org>
> Sent: Thursday, November 11, 2004 7:05 PM
> Subject: RE: honeycombing foam cores
>
>
>
> And this can be the difference between legal and not legal!
>
> 


=================================================
To access the email archives for this list, go to
http://lists.f3a.us/pipermail/nsrca-discussion/
To be removed from this list, go to http://www.nsrca.org/discussionA.htm
and follow the instructions.